$ 829.95In Stock
| Model # 1355920
- SAVE BIG WITH NO SALES TAX!
- FAST FREE SHIPPING VIA UPS!
- INCLUDES INSTALLATION RESOURCES
Riptide SE proves that great performance doesn't always have to mean large and expensive. Perfect for medium-sized boats, Riptide SE offers a durable build and precise boat maneuvering for your saltwater fishing excursions. Its unique mount and latch-and-door design ensure a solid fit and convenient removal when necessary. Riptide SE: the perfect no-nonsense trolling motor for medium-sized saltwater craft.
Riptide SE 70 Full Details
Small to medium saltwater v-hull, flats, and general fishing boats up to 23'. The 70 lbs thrust motor is recommended for boats weighing up to 3,500lbs. For more help picking the right thrust level - or to learn how much your boat weights - please refer to our thrust guide.
How It's Unique
Riptide SE is Minn Kota's entry-level saltwater bow mount motor, and is designed to be functional, rugged and affordable. It's mount was recently upgraded and now use an extruded arm built from marine-grade anodized aluminum for increased longevity. All Riptide SE motors feature a variable speed motor and hand control. The Riptide SM line is the next step-up in the Minn Kota saltwater series. If you want a more powerful motor (up to 101 lbs) and an optional BowGuard mount with a beefy spring-protected shaft housing you'll want to consider the Riptide SM.
Saltwater and Freshwater
The Riptide SE 70 comes with a 52" shaft length. For help selecting a shaft length, please see our shaft guide.
Riptide SE Latch & Door Mount, Variable Speed, Tilting and Extended Tiller, Battery Gauge, Fully Encapsulated Components, Corrosion Protection, Super Quiet Operations, Weedless Wedge Prop, Composite Shaft. (Learn about these features)
Riptide SE isn't compatible with any AutoPilot, Sonar or i-Pilot accessories. But it is compatible with select quick release plates and handle extensions - please see the right-hand side product bar.
This motor is bolted directly to the bow of the boat using the included mounting hardware, and requires drilling into the boat for installation. Ideally, it's best to have access to the underside of the mounting platform in order to secure and fasten the bolting hardware. However, if accessing the underside is impossible you can use no access bolts to secure the motor from the top. For more information see our compatibility and mounting guides.
21.795" x 5"
Same pattern as Download Bolting Pattern
Motor Voltage and Batteries:
Power Lead Length:
Pedal Cord Length:
What Is Included:
- Riptide SE 70 trolling motor
- Power leads
- Mounting hardware
- Owners manual
What Else Is Required:
1 Marine Battery, Battery Charger, Circuit Breaker (Recommended)
42 amps at maximum speed
Motor Run Time:
Important Note: As you likely won't be running your trolling motor perpetually, the actual amount of on-the-water time a motor should allow will be substantially longer than times listed. Actual motor run time can vary depending on conditions (winds, waves, etc) and the type of battery used. Listed below are run-time estimates assuming a 100 amp hour rated battery. To learn more, please see our article on calculating motor run time.
- 20+ Hours: At slow, trolling speeds that draw 5 amps or less
- 4.8 Hours: Approx. run time with throttle 50% open
- 2.4 Hours: Approx. run time with the motor at full throttle
Stow and Deploy Method:
The new-and-improved Riptide SE mount features a multi-hinged design that makes stowing and deploying a snap. When not in use, the motor can be manually removed from the water and naturally rotates into a flat position to convenient stow on the deck. When ready for use, simply slide the motor head and shaft forward, and it effortlessly swings back down into the water.
Motor Steering Method:
The Riptide SE is steered by hand. The unique Tilt Twist Tiller handle tilts up to make steering easier and more convenient. Motor speed is controlled by rotating the hand lever.
Riptide SE's latch-and-door mount makes it easy to adjust the shaft and control how deep the propeller sits in the water.
All Edge motors have a variable speed motor. Learn more about fixed vs. variable speed motors.
The motor's composite shaft caries a lifetime guarantee. If it's ever broken - regardless of the circumstances - Minn Kota will replace it at no charge. The rest of the motor caries a two year warranty backed up by hundreds of local Minn Kota service centers across the country.
Model 1355920 - 10"H x 21"W x 66"L WT: 49.0lbs