$ 199.99In Stock
| Model # 1832120
- FREE SHIPPING ON ALL MOTORS!
- GREAT CUSTOMER SERVICE!
- NO SALES TAX*
This 6 amp charger is the new gold standard for dual battery 24v trolling motor installations. It costs a bit more than its predecessor the MK-210D, but you get a smaller footprint, cooler operating temps and several other features that make it a best-seller.
This Precision on-board charger is designed to enable fast and safe charging. Built-in technology protects against overloaded outlets and compensates for long extension cords, as well as variable temperatures, providing a consistent charge to your batteries.
Meanwhile it has an easy-to-understand LED display that lets you select your battery type by bank, monitor each bank's connection status, power status, charging state and selected battery type. It's waterproof, resistant to saltwater corrosion and shock resistant. And it even has a AC plug holder keeping the prongs dry and out of harm's way. All backed by a three year warranty.
6 Amp Double Bank Precision Charger MK 212PC Full Details
On-Board (AC Power)
- Digitally controlled micro-processor controls advanced multi-state charging to ensure speedy charging and long battery life
- LED display enables easy-to-read connection status, power status, percent charged and selected battery type
- Automatic temperature control prevents batteries from overcharging
- Battery Equalization
- Durable construction - waterproof, saltwater resistant, shock resistant
- Three year warranty
Re-charging two fully depleted batteries will take approximately 10 hours.
This on-board charger is designed to be permanently mounted in the boat and hard-wired to the trolling motor battery. Mounting the charger will likely require the drilling of minor holes, and all mounting screws and hardware is included. The battery leads are pre-wired for battery terminals and can be permanently connected without further accessories or parts.
The charging leads that run between the charger and the battery are 6' long. If further length is needed, the cables can be extended using (at a minimum) 12 gauge wire. If extending, The splice should be made between the fork in the output cable and the fuse holder. The fuse holder should always remain within 7" of the battery terminals. Extensions should be limited to a maximum of 15'.
The AC power cord is also 6' in length and can be extended using any standard AC extension cord.
9.25" x 8.25" x 3.25" WT: 8lbs
6 Amp Double Bank Precision Charger MK 212PC Reviews
Rogue jet 22 foot fast water
Charger works great. From time of order to arrival was very fast TrollingMotors.net does a fabulous job on getting orders out to you quick.
16' aluminum v bottom
Love it- plug in and don't wonder if your battery is fully charged. Quick turnaround time. quality product.
Carolina Skiff DLV 218
Great charger. Upgraded from an older digital charger and I love the smaller footprint, but more importantly, that it doesn't get hot when charging. This is much better for long term battery life. Indicator lights are clear and straightforward. Strongly recommend. Thanks TM.net for the recommendation and the fast shipping!
1991 Basstracker 16' Panfisher
I recently bought a used Minn Kota Fortex 80 off a friend and had to switch my system from a 12v to a 24v system. Therefore, I needed a new 2 bank charger. I already had a Minn Kota MK106 single bank charger for my 12v system and was completely satisfied with it's performance. I just naturally had to stick with Minn Kota brand from past experience. Placed an order with Trollingmotors.net and they shipped the 6 amp Double Bank Precision Charger MK212PC. Kudos to Trollingmotors.net for the quick shipment ... would have gotten it sooner, if it hadn't been for the July 4th weekend. I installed the charger (after reading the instructions) without any problems. Been fishing twice since I received it and the charger works like a charm. Nice plug storage unit when charger isn't in use. Good quality charger and my shopping experience with Trollingmotors.net was great. I will be a repeat customer when the need arises.
Alumaweld 17' Sea Dory
After a very informative visit with Clayton of trollingmotors.com about chargers I picked the Minn Kota 6 amp 2 bank charger mk 212. The instructions that came with the charger was awesome it answered all my questions that I would of asked and for once a set of instructions that actually made sense. Outstanding job Minn Kota. As far as purchasing a trolling motor I would not go any where else. I ordered my Minn Kota Rip Tide Ulterra 80# 60", mk - 32 removeable mount, and the mk 212 charger. I placed my order on a Friday and Clayton took the time to get my gear sent to me off the west coast vs the east coast my order arrived on Monday un real. The information provided by trollingmotors.com is the unreal it will help you pick what you need and the Minn Kota web site was also very informative. Give Clayton a call you won't regret it. Willie Chandler