$ 99.99In Stock
| Model # 1854023
- FAST FREE SHIPPING VIA UPS!
- GREAT CUSTOMER SERVICE!
- NO SALES TAX*
Ideal for fishermen who want to easily remove their Ultrex, Edge, Fortrex, or Maxxum trolling motor from the deck of their boat. Made from high-yield composite, this bracket is ultra-strong and corrosion-resistant, and has no sharp edges. The quick release's low-profile design leaves the deck clear when the motor is removed, and a locking "U" handle with stainless steel pins can be secured with a padlock (not included) to prevent theft.
Ultrex, Fortrex, Maxxum and Edge Quick Release MKA-23 Full Details
Minn Kota Quick Release MKA-23 | 1854023
Compatible with all Minn Kota Ultrex, Fortrex, Maxxum, Edge or All Terrain trolling motors
This quick release allows for easy, tool-free removal of the trolling motor from the deck. To attach the two parts of the quick release plate, simply set the large outer plate on top of the smaller inner plate and press the stainless steel "U" shaped handle through the side of the mounting plates and the outer metal pin. Once in place, you can run a padlock through the hole in the outer metal pin to prevent theft.
The top portion of the bracket bolts directly to the trolling motor. The bottom plate bolts directly to the deck of the boat. Drilling is required, and it's ideal if you have access to the underside of the bow mounting surface. If not, it's possible to use no access bolting nuts to secure the quick release bracket. Download installation manual.
Outer plate: 19" L x 6" W x 1" H; Inner Plate: 10.25" L x 3.75" W x 1" H Download Mounting Dimensions
Ultrex, Fortrex, Maxxum and Edge Quick Release MKA-23 Reviews
Haven't had the time to install, but very satisfied with the company!!
The quick release mount works great! I have an aluminum boat and where I mounted the trolling motor was uneven so when I pulled my motorguide off I found that their was 1/8 inch rubber rings between the boat and the trolling motor. I ended up putting this between the quick release and the boat because with the aluminum being a little uneven it was very hard to pull the pin in the bracket. By adding the 1/8 inch rubber spacers gave me just enough room to pull the pin with ease. I made a phone call to trollingmotors.net because I had a question about when the electrical connection from minn Kota would be back in stock and much to my surprise the owner answered my call and was fantastic to talk to. He explained what was going on with the plugs and recommended another product that I could get now. Great company in my opinion and I will recommend them to anyone else looking for a trolling motor or parts for one and also the shipping was very fast I had my ultrex, mount, adaptors, and plug in 2 days after my order!
Ranger Z185, 18.5 ft
This was easy to install and provides a very secure mount for my Ultrex.
Emailed to make sure I was ordering the right part. Got a quick response. Ordered the correct part and got it before I expected. Great service all the way around.
15ft Flat Boat with 44" bottom
Great trolling motor! You have to get the quick release. It is so nice to be able to pull the motor of when gator or frog hunting and for winter storage.
Gatortail flat bottom 17ft
I own the minn Kota maxxum hand control 55lbs thrust and this quick release bracket is the ticket if you seldomly take your trolling motor on and off the bow of your boat. It's simple yet quick design with one pull of the pin your trolling motor is off in seconds. Also the locking feature is really nice sense of security when boat is left unattended. Has very strong hold to where u would think something being used under strain from the trolling motor really doesn't flex or move around on the bracket. Would definetly recommend it to any one buy a Minn Kota maxxum edge or fortrex .