$ 782.81
Backorder| Model # 940200110
- FREE SHIPPING ON ALL MOTORS!
- GREAT CUSTOMER SERVICE!
- NO SALES TAX*
Quick Details
For the serious but value-conscious fisherman, we are excited to introduce the new MotorGuide X3 trolling motor in the 40-70lb thrust range. The X3 is a sturdy, no-frills, foot-controlled motor that offers a number of innovations, including best-in-class steering performance and a large diameter corrosion-resistant shaft with construction that provides greater impact protection and is backed by a lifetime factory warranty. The MotorGuide X3 also debuts a redesigned and reinforced foot pedal providing better feel and control to keep you on top of the fish! Finally, the X3 includes a new, aircraft-grade, extruded aluminum mounting bracket built tough to minimize flex and deliver precision control under high-thrust.
X3 70FW Full Details
Recommended for:
Medium to large freshwater v-hull, bass, pontoon and general fishing boats up to 23'. The 70 lbs thrust motor is recommended for boats weighing up to 3,500lbs. For more help picking the right thrust level - or to learn how much your boat weighs - please refer to our thrust guide.
How It's Unique
The X3 series is a step-up in innovation from the Freshwater series. While both models are controlled with a cable foot pedal, the X3 offers improved steering control and sturdier shaft construction. Additionally, the X3 is available with thrust options of 45, 55 and 70 lbs.
If you're looking for value-priced wireless control, we recommend the MotorGuide Wireless series trolling motors. The Wireless series motors are available in 45, 55 and 75 lb thrust levels.
Water Type:
Freshwater Only
Shaft Length(s):
Shaft lengths of 45" and 50" are available for X3 70 motors. For help selecting a shaft length, please see our shaft guide.
Motor Features:
Precision Steering, Combined Composite and Stainless Shaft, Two-Blade Prop. (Learn about these features)
Available Upgrades:
No
Mounting Details:
This motor is bolted directly to the bow of the boat using the included mounting hardware, and requires drilling into the boat for installation. Ideally, it's best to have access to the underside of the mounting platform in order to secure and fasten the bolting hardware. However, if accessing the underside is impossible you can use no access bolts to secure the motor from the top. For more information see our compatibility and mounting guides.
Mount Dimensions:
Not Available
Bolting Pattern:
Not Available
Wiring Details:
X3 70 can be wired directly to the batteries, and can also be used in conjunction with a plug and receptacle for a cleaner, more professional installation that's easy to remove. To protect your motor from damage, a circuit breaker is also recommended but is not required for installation.
Motor Voltage and Batteries:
The X3 55 is a 24 volt motor and requires (2) 12-volt marine batteries. For more information, see our articles on battery selection or battery wiring diagrams.
Power Lead Length:
5 Feet
Pedal Cord Length:
Not Applicable
What Is Included:
- X3 70 trolling motor
- Foot pedal
- Power leads
- Mounting hardware
- Owners manual
What Else Is Required:
(2) Marine Batteries, Battery Charger, Circuit Breaker (Recommended)
Amperage Draw:
42 amps at maximum speed
Motor Run Time:
Important Note: As you likely won't be running your trolling motor perpetually, the actual amount of on-the-water time a motor should allow will be substantially longer than times listed. Actual motor run time can vary depending on conditions (winds, waves, etc) and the type of battery used. Listed below are run-time estimates assuming a 100 amp hour rated battery. To learn more, please see our article on calculating motor run time.
- 20 Hours: At slow, trolling speeds that draw 5 amps or less
- 4.8 Hours: Approx. run time with throttle 50% open
- 2.4 Hours: Approx. run time with the motor at full throttle
Stow and Deploy Method:
The X3 series motors features a new aircraft-grade extruded aluminum mount. When the trolling motor is not in use, the motor can be manually removed from the water and naturally rotates into a flat position to convenient stow on the deck. When ready for use, simply slide the motor head and shaft forward, and it effortlessly swings back down into the water.
Motor Steering Method:
The MotorGuide X3 series motors are steered by foot pedal. The cable-driven foot pedal is controlled by rocking your foot back and forth to control motor direction while motor speed is controlled by the rotating dial on the side of the foot pedal.
Shaft Adjustment:
An adjustable depth collar makes it easy to set how deep the shaft and propeller sit in the water.
Motor Speed:
All MotorGuide X3 motors are fixed speed. Learn more about fixed vs. variable speed motors.
Owners Manual:
Warranty Period:
Two Years
Warranty Details:
MotorGuide motors carry a 2 year warranty against manufacture defects and a lifetime warranty on shafts, all supported by hundreds of local MotorGuide service centers across the country.
Box Dimensions:
Box dimensions and weight vary by motor: